Muni.org > Departments > Development Services> Permit Information & Inspection Request
Click Here To Go Back To Permit Information

Permit Number: C11-1099
Permit Type: Commercial Building Permit - None BldgAlter
Address: W 320 5TH AVE Anchorage
Location:
Work Description: Phase II - Tenant Improvement @ 5th Ave Mall - includes elec,plbg,mech; (46) inspections; please do not issue permit until CB111099 has CO; tb
Status: Closed
Project Name: APPLE
Review Type: Structural
Result: Approved
Result Date: 5/3/2011 4:38:51 PM

Comments:

 Code SectionReview CommentStatus



Advisory Information:

PERMIT STATUS

04/21/2011 – Initial review (273117).  Comments issued.

04/28/2011 – Reviewed responses (274435).  Additional information required.

05/03/2011 - Reviewed responses (274722).  Approved.

 

GENERAL

This review is code compliance review based on the requirements of the International Existing Building Code (IEBC), 2006 Edition, and all adopted references thereto, as amended by the Municipality of Anchorage in Anchorage Municipal Code (AMC) Title 23.  This review does not permit the violation of the building codes, nor any federal, state, or municipal regulation.

 

The following comments must be addressed before a permit may be issued.


FREQUENCY OF INSPECTIONS
Please note in the Statement of Special Inspections the required frequency of inspections (continuous vs. periodic).

Reference:  IBC Section 1705.2

 

4/28/11 – Resolved.  Frequency noted on the plans.  MMP

 

SPECIAL INSPECTION PERSONNEL

Please provide a letter from the Owner/Owner's Representative, or Special Inspection Agency stating that the Special Inspection Agency has been retained by the Owner to provide special inspection services for the project as required by IBC Chapter 17.

Reference: AMC 23.15.1704.1.4

 

4/28/11 – Not resolved.  No information provided this submittal.  MMP

 

5/3/11 - Resolved.  Owner to enter into contract with QA Services.  MMP

 

STEEL FABRICATOR QUALIFICATIONS

Please provide a copy of the steel fabricator certification from AISC, IAS, or MOA for fabrication of structural steel without special inspection required by IBC Chapter 17.  In lieu of certification, please submit the name(s) and resume(s) of the individual(s) providing shop special inspection for review.

Reference:  IBC Section 1704.2.2; AMC 23.15.1704.1.4

 

4/28/11 – Resolved.  AISC Certification for Sampson Steel provided.  MMP

ADA Compliance      Privacy Statement & Disclaimer      Employee Search      eNewsletter      RSS