Review Comments

Click Here To Go Back To Permit Information

Permit Number:	06 5266
Permit Type:	Commercial Building Permit - None BldgNew
Address:	3635 AIRCRAFT DR Anchorage
Location:	address was changed from 4737 Lakeshore Dr; 5-14-12, K.Wilson
Work Description:	Work Descr: 7200 sq ft, Remarks: tb 11/24/09 Keep file activetb2/18/10 new owner; contractor transfer to ownertb
Status:	Closed
Project Name:	AIRCRAFT DRIVE HANGARS #1
Review Type:	Electrical
Result:	Approved
Result Date:	10/11/2006 12:00:00 AM

Comments:

	Code Section	Review Comment	Status

Advisory Information:
. C(1): The following comments are based on the 2005 National Electrical Code and should be resolved before a permit is issued. This correction list is not a building permit. The approval of plans and specifications does not permit the violation of any section of the NEC, or any federal, state or local amendments to these codes. 7/15/2006. NO RESPONSE REQUIRED. C(2): CURRENT ADOPTED NATIONAL ELECTRICAL CODE 2005: Sheet E1.0 (Electrical Specifications - Current Adopted Code). The referenced code on the electrical plans is NEC-2002.Note that the current adopted code is NEC-2005 and it should be the base of your electrical design. Refer to Anchorage Administrative Code AAC 23.10.302.3. 7/15/2006. Comment has not been addressed. CORRECTION REQUIRED. C(3): CONTINUOUS LIGHTING LOAD CALCULATION: Sheet E1.0 (Total Connected Load - Code and Standard). Please provide the base code section for your lighting calculation. If the10 KVA is lighting, it should be calculated as continuous load. Refer to NEC Section 210.19(A) and the Anchorage Administrative Code AAC 23.10.302.3. Please address. 7/15/2006. This comment has not been addressed. CORRECTION REQUIRED. C(4): LABELED PANEL: Sheet E1.0 (Panel Schedule - Panel A). Panel schedule is identified as panel A. The single-line diagram referenced only panel A1 and A2. Please revise. 7/15/2006. Comment has not been addressed. CORRECTION REQUIRED. CLASSIFIED LOCATION AREAS: Sheet E2.1 (New Hanger Electrical Plan - Classified Location Area Boundaries). Note #1 states that the hanger is Class I Div. 2 in according with NEC 513. Please identify on the plans the classified areas including the adjacent areas to class I Div.2. Refer to the Anchorage Administrative Code AAC 23.10.302.3. Please address. /15/2006. Will take the entire hanger including the adjacent area as Class I, Div.2. Approved. CEILING HEIGHT AND CLASSIFIED AREAS: Sheet E1.0 (Lighting Fixture Mounting +20'). Fixture item #A allows the light to be hung by a chain +20'. Please identify on the plans the classified areas to allow us to verify the light fixtures are not in the classified areas. 7/15/2006. Will take the entire hanger in C(5): ELECTRICAL PLAN NOTES: Sheet E2.2 (Electrical Plan Notes). There is a note that states "see sheet E2.2 for electrical plan notes". There are no notes on sheet E2.2. Refer to the Anchorage Administrative Code AAC 23.10.302.3. Please clarify. 7/15/2006. This comment has not been addressed. CORRECTION REQUIRED. C(6): ELECTRICAL STATUS: CORRECTIONS REQUIRED C(7): 6-9-06. ELECTRICAL STATUS: CORRECTIONS REQUIRED. PLEASE ADDRESS THE ABOVE COMMENT WITH A RESPONSE LETTER. PROVIDE REVISED ELECTRICAL. C(8): 7/15/2006. ELECTRICAL STATUS: CORRECTIONS REQUIRED. PLEASE ADDRESS THE ABOVE COMMENT WITH A RESPONSE LETTER. PROVIDE REVISED ELECTRICAL. Approved 10-11-06. The plans submitted June 19, 2006 are the same as the plans approved on May 5, 2006 for permit 06-5269