Review Comments

Click Here To Go Back To Permit Information

Permit Number:	09 4189
Permit Type:	Commercial Building Permit - None BldgAlter
Address:	W 5000 INTERNATIONAL AIRPORT RD Anchorage
Location:
Work Description:	Work Descr: TENANT IMPROVEMENT - 44 INSPECTIONS PAID CCO extended to 12/15/09 per G.Stuller, Remarks: JRD
Status:	Closed
Project Name:	MCDONALDS
Review Type:	Mechanical
Result:	Approved
Result Date:	7/29/2009 12:00:00 AM

Comments:

	Code Section	Review Comment	Status

Advisory Information:
. STATUS: 7-21-09 Comments to be addressed. 7-28-09 COMMENTS TO BE ADDRESSED. 7-29-09 APPROVED. The following comments based on the 2006 International Building, Mechanical and Fuel Gas Codes must be resolvedbefore a permit is issued. The approval of plans and specifications does not permit the violation of any section of the IBC, IMC, IFGC or any federal, state or local regulations. RESOLVED 7-28-09. Provide structural, seismic and wind load calculations as applicable plus fastening details for MAU-1 and three Type I Grease Hoods to include engineers stamp and signature, for structural review on a deferred submittal basis. RESOLVED 7-28-09. M401 A dishwasher vent hood and exhaust fan are required per IMC 507.2.2. RESOLVED PER RESUBMITTAL RECEIVED 7-28-09. 2/M501 PVC is not permitted to pass through a return air plenum ceiling (IMC 602.2.1) 7-28-09 UNRESOLVED. THERE WERE ORIGINALLY TWO DETAILS LABELED AS #2 ON SHEET M501. THE LOWER ONE APPEARS TO BE PVC INTAKE AND EXHAUST FOR THE NEW WATER HEATER (700.06). IN ORDER TO GET TO THE ROOF IT MUST PASS THROUGH THE PLENUM CEILING. PLEASE ADDRESS. RESOLVED PER RESUBMITTAL RECEIVED 7-29-09. 2/M501 1/2" to 1" mesh screening is required over the air intake per local amendment to IMC Table 401.5. RESOLVED PER RESUBMITTAL RECEIVED 7-28-09. 9/M501 Grease exhaust outlets shall terminate at lease 40 inches above the surface of the roof (IMC 506.3.12.1). Please clarify. RESOLVED PER RESUBMITTAL RECEIVED 7-28-09. When the above comments have been addressed please update the plans at the MOA Plans Review Office with three sets of revised mechanical pages to include clouded changes, engineers stamp and signature. RESOLVED 7-29-09.