Inspection Info

Click Here To View Another Inspection

Inspection #: 850889

Inspection Type: Plumbing Rough

Inspector: J.Bean

Result: Partial

Comment: Plumbing Approved for install and test of approved flex's for heat and gas piping to Micro-Turbines

Inspection Corrections

Date Status Code Description Ref Location Comments
3/13/2025 Corrected PlumbRgh14 Comments See Inspectors Comments Exterior Hydronic Piping Per 2018 IMC Section 1202.7 Flexible connectors, expansion are required from one structure to another, one pad to another pad. Per IMC Section 12.06.9 Stresses and Strains - Piping to be installed so as to prevent strains and stresses on piping
3/13/2025 Corrected PlumbRgh14 Comments See Inspectors Comments Basement Sump Pit (floor sink) Per 2018 UPC 710.3 thru 710.10 Listed sewage ejectors required to serve any approved receptors or floor drain. (Listed sewage ejector must be water tight) Note: Floor sink must be trapped when connected to permanent sewer. Note: Based on inspection and evaluation with installer grade can be achieved to gain elevation to tie into existing sewer main. Note: A field change order form could delete installation for the open sump pump.

Inspection #:	850889
Inspection Type:	Plumbing Rough
Inspector:	J.Bean
Result:	Partial
Comment:	Plumbing Approved for install and test of approved flex's for heat and gas piping to Micro-Turbines

Date	Status	Code	Description	Ref	Location	Comments
3/13/2025	Corrected	PlumbRgh14	Comments	See Inspectors Comments	Exterior Hydronic Piping	Per 2018 IMC Section 1202.7 Flexible connectors, expansion are required from one structure to another, one pad to another pad. Per IMC Section 12.06.9 Stresses and Strains - Piping to be installed so as to prevent strains and stresses on piping
3/13/2025	Corrected	PlumbRgh14	Comments	See Inspectors Comments	Basement Sump Pit (floor sink)	Per 2018 UPC 710.3 thru 710.10 Listed sewage ejectors required to serve any approved receptors or floor drain. (Listed sewage ejector must be water tight) Note: Floor sink must be trapped when connected to permanent sewer. Note: Based on inspection and evaluation with installer grade can be achieved to gain elevation to tie into existing sewer main. Note: A field change order form could delete installation for the open sump pump.