| Date | Status | Code | Description | Ref | Location | Comments |
| 9/24/2024 | Corrected | PlumbRgh14 | Comments | See Inspectors Comments | Mobile home tie down | Install mobile home tie downs in accordance with local amendments and manufacturer's installation instructions. |
| 9/24/2024 | Transfer | PlumbRgh14 | Comments | See Inspectors Comments | Sanitary Drain End of Line Clean Out | Install DWV (Sanitary Drain) End of Line Clean Out accessible outside of skirting. |
| 9/24/2024 | Corrected | PlumbRgh14 | Comments | See Inspectors Comments | Building Sanitary Drain to Sewer Connection | Use proper listed and approved shielded coupling for tie-in point. (ABS/PL to Cast Iron Mission Band) |
| 9/24/2024 | Corrected | PlumbRgh14 | Comments | See Inspectors Comments | Forced Air Furnace Vent | Maintain FAF vent manufacturer's installation instructions recommended clearance to combustibles. |
| 9/24/2024 | Corrected | PlumbRgh14 | Comments | See Inspectors Comments | Underground natural gas piping | 2018 UPC Local Amendment Section 1210.1.10 Frost heave protection for copper tubing. "At points where copper tube type systems enter or leave the ground, they shall be protected from frost heave action by the incorporation of a suitable above ground 6 inch radius loop, or listed fuel gas piping connector or equal size." |
| 9/24/2024 | Corrected | PlumbRgh14 | Comments | See Inspectors Comments | Underground Natural Gas Piping | Test underground Natural Gas piping at 60psi |
| 9/24/2024 | Corrected | PlumbRgh14 | Comments | See Inspectors Comments | Water Heater Gas Flex | Replace existing damaged gas flex, for listed and approved gas flex. |
| 9/24/2024 | Corrected | PlumbRgh14 | Comments | See Inspectors Comments | Water Heater Vent | Water Heater vent not attached to appliance. Maintain single wall vent manufacturer's recommended 6" clearance to combustibles. |
